If you drive a van in or around Bristol, you know how important it is to get the most from every mile. Whether you’re hauling tools, making deliveries, or covering long motorway trips, your van needs to be reliable, responsive, and efficient.
At Remaps Bristol, we specialise in van remapping that makes a real difference. We’ve helped hundreds of local tradespeople, couriers, and fleet owners improve performance and cut fuel costs — all through safe, professional ECU tuning.
What Is Van Remapping?
Van remapping is the process of adjusting the software in your van’s engine control unit (ECU). This software controls everything from fuel injection to turbo boost and throttle response.
From the factory, vans are programmed with settings that prioritise emissions compliance and general reliability — but they often leave performance and fuel efficiency on the table.
By remapping the ECU, we unlock hidden power and improve how your van drives day to day.
What Are the Benefits?
Most van drivers notice immediate improvements after a remap:
- Increased low-end torque (ideal for heavy loads)
- Better throttle response
- Smoother gear changes (especially in automatics)
- Improved fuel economy
- Easier hill climbs and overtaking
You’ll find your van no longer struggles when loaded or driving uphill. And because the engine doesn’t have to work as hard, you may even save money on fuel over time.
Is It Worth It for Work Vans?
Absolutely — especially if you’re on the road every day.
For many local businesses in Bristol, a van remap pays for itself within a few months. That’s why so many electricians, plumbers, builders, and delivery drivers come to us for tuning.
We’ve tuned vans used for:
- Trades and tool transport
- Courier and logistics work
- Campervan conversions
- Agricultural and off-road use
- Towing trailers and plant equipment
Whether it’s a single van or an entire fleet, the gains are noticeable and long-lasting.
Common Vans We Remap in Bristol
We work on nearly every make and model of van, including:
- Ford Transit / Transit Custom / Connect
- Volkswagen Transporter / Caddy / Crafter
- Vauxhall Vivaro / Movano / Combo
- Renault Trafic / Master / Kangoo
- Peugeot Boxer / Expert / Partner
- Mercedes Sprinter / Vito
- Citroen Dispatch / Relay / Berlingo
- Fiat Ducato / Scudo
From small city vans to full-size commercial vehicles, we can remap nearly any diesel or petrol van with an ECU.
How Much Power Can I Gain?
Van remapping usually focuses on torque rather than high-end speed. The goal is better drivability, not racing performance.
That said, most vans see gains of:
- 20–40% more torque
- 15–30% more horsepower
- Up to 10% better fuel economy (depending on driving habits)
For example:
- A Ford Transit Custom 2.0 TDCi (130 PS) can see up to 185 PS and much stronger torque across the rev range
- A VW Transporter T6 2.0 TDI (102 PS) can rise to 150+ PS with Stage 1 tuning
- A Vauxhall Vivaro 1.6 CDTi can gain around 40 Nm of torque and better mid-range pull
These improvements make a huge difference in stop-start city traffic and long-distance motorway driving alike.
How Long Does It Take?
Most van remaps take 1 to 2 hours.
We run a full diagnostic check before and after to ensure the vehicle is healthy and the map is running smoothly.
You can book a visit to our workshop or use our mobile service — we can come to your home, workplace, or site, anywhere in the Bristol area.
Is Van Remapping Safe?
Yes — when done properly.
At Remaps Bristol, we only tune vans that are in good mechanical condition. We use professional tools and write custom software based on your specific vehicle and use case.
We don’t push your engine beyond its limits. Instead, we unlock performance that’s already safely within the vehicle’s capabilities — just hidden by factory restrictions.
Will It Affect My Van’s Lifespan?
Not when done correctly.
In fact, many customers report their van feels less strained after a remap. That’s because you no longer have to rev hard or shift down as often to get up to speed.
By improving torque at low RPM, the engine works more efficiently — which can reduce long-term wear if maintained properly.
Does It Help With Towing?
Yes. One of the biggest benefits of van remapping is increased torque, which makes towing far easier.
Whether you’re pulling a trailer, plant equipment, or tools in a box trailer, you’ll notice your van feels stronger and more responsive under load.
We’ve remapped dozens of vans used for towing throughout Bristol, and the feedback is always positive.
How Much Does Van Remapping Cost in Bristol?
Our van remapping prices are competitive and fully transparent:
- Stage 1 van remap: From £260
- Stage 2 (with hardware upgrades): From £350
- DPF, EGR, and limiter adjustments: From £50–£100
If you’re remapping multiple vans or managing a business fleet, we offer bulk discounts and flexible scheduling to minimise downtime.
Get in touch for a free quote based on your make, model, and business needs.
Why Choose Remaps Bristol?
We’re local, experienced, and trusted by trades and fleet managers across the city.
When you choose Remaps Bristol, you get:
- Safe, reliable tuning for your van
- Fully custom maps — no generic files
- Fast turnaround and mobile service available
- Clear pricing with no hidden fees
- Ongoing support if you ever need help
We’ve tuned vans in Clifton, Bedminster, Redland, Fishponds, Avonmouth, Kingswood, and everywhere in between. Many of our clients come back when they replace their van or upgrade their fleet.
Book Your Van Remap Today
If you’re ready to improve how your van drives, Remaps Bristol is here to help.
Whether you’re a solo tradesperson or a fleet operator, we’ll deliver a remap that boosts performance, improves efficiency, and keeps your van running strong.
Contact us now to get a free quote, ask questions, or book your van remap in Bristol. Let’s get your van working smarter — not harder.
Get A Quick Quote
Please provide your contact details here, and we’ll get back to you shortly with a personalised quote.
